Close

Welcome back to Stockhouse
Member Sign In

Email or Username:
Password:
Close

Become a member today, It's free!

We will not release or resell your information to third parties without your permission.

Enter your email address:
By providing my email, I consent to receiving investment related electronic messages from Stockhouse.

Monday's Mover



Monday's Mover > Group's Default Discussion > Oroco Announces 425 Meter Stepout View modes: 
  • Oroco Announces 425 Meter Stepout

    - |
    User avatar
    2.5 stars

    to Mineralized Zone

    VANCOUVER, BRITISH COLUMBIA--(Marketwire - Sept. 9, 2008) - Oroco Resource Corp. (TSX VENTURE:OCO) is pleased to announce the results from a surface trenching program on the Cerro Prieto property, located in Sonora State, Mexico.

    Highlights:

    - Trench cut 425 meters north of current drilling exposes mineralized zone of comparable thickness and grade to that observed in holes drilled in Phase One drill program.

    - 163.4 g/t Ag, 0.327 g/t Au, 0.34% Pb and 0.30% Zn over true thickness of 13.5 meters within a 36.3 meter section averaging 79.7 g/t Ag, 0.401 g/t Au, 0.32% Pb and 0.47% Zn.

    The trench cut what is believed to be an extension of the Cerro Prieto mineralized zone 425 meters north of the current 6,000 meter Phase One diamond drill program. The 425 meter strike length between the most northerly drill section of that program and the trench is virtually unexplored with the exception of a few small historical pits that partially exposed minor veining and alteration.

    The trench exposes veining and brecciated veining comparable to that seen in drill core from the mineralized zone in the area of current drilling to the south. The assays for the full length of the sampled trench averages 0.401 g/t Au, 79.7 g/t Ag, 0.32% Pb and 0.47% Zn over a true thickness of 36.3 meters. Within that section, a higher grade silver zone assayed 163.4 g/t Ag, 0.327 g/t Au, 0.34% Pb and 0.30% Zn over a true thickness of 13.5 meters. Also within the trench, a separate section of higher grade lead and zinc averages 0.57 g/t Au, 25.2 g/t Ag, 0.57% Pb and 1.30% Zn over a true thickness of 6.0 meters. Mineralization is open on either end of the trench and a program of detailed trenching, mapping and sampling has begun both to the north and south of the trench.

    The company is pleased to note the consistency of the true thickness and average grade of the trench with that of the Phase One drill hole intersections for which assays have been previously reported. The trench is located on section 1075 N, 425 meters north of the northern most drill section and 925 meters north of the southern-most drill section of the current drill program. For a plan view map showing the location of the drill hole sections and the trench, and a longitudinal section showing the drill hole intercepts, please refer to Oroco's website at
    http://www.orocoresourcecorp.com/Cer...o-Project.html.

    The Cerro Prieto polymetallic project is located in Sonora State, Mexico and consists of three mineral concessions totaling 2,508 hectares. Oroco holds a 100% interest in these concessions. In April of this year a Phase 1 drill program commenced and at the completion of the this program (6,000 meters in approximately 25 holes) the mineralized zone will have been drill tested vertically at 100 meter centers along a strike length of at least 600 meters to a depth of 400 meters allowing the calculation of an initial estimation of resources.

    Qualified Person

    Kenneth R. Thorsen, B.Sc., P. Geo., is a director of the company and is a 'qualified person' for the purposes of National Instrument 43-101 Standards of Disclosure for Mineral Properties of the Canadian Securities Administrators and has verified the data (including sampling, analytical and test data) and prepared or supervised the preparation of the information contained in this news release.

    Quality Assurance & Control

    The Company has implemented a quality assurance and control (QA/QC) program to ensure sampling and analysis of all exploration work is conducted in accordance with the best possible practices. Split core is transported to the ALS Chemex laboratory in Hermosillo where it is crushed and pulverized, with pulps sent to the ALS Chemex laboratory in Vancouver, B.C. for assaying. The other half of the core is retained for future assay verification. The QA/QC policy includes the chain of custody monitoring, insertion of blanks, standards and duplicates in the initial samples submitted. The laboratory provides an additional internal control program.

    Stephen Leahy, President


    The TSX Venture Exchange does not accept responsibility for the adequacy or accuracy of this release.

    Rate this post
    0 stars
    v
    Usefulness

    Clarity

    Credibility